|
Consultants Network
Will Bray, 512-771-9986, is looking for
a consultant that can "Define BOM and locate software code, and
append/modify existing analog-digital conversion circuit board, to
take 4 output lines of digital data into "serial protocol" for
output to just ONE USB secure digital memory card."
Anyone interested can reply to Will at the
above phone number or email him at:
willbray7@grandecom.net |
|
June 27, 2008
|
|
|
The Dallas office of
CH2M HILL has an immediate opportunity for a licensed electrical
engineer to manage the electrical engineering discipline in the
Manufacturing & Life Sciences business unit. This group is
responsible for power distribution, lighting and auxiliary systems
design for new and retrofits of heavy industrial plants. Projects
range from warehouses to complex EPC contract with wiring and
routing for heavy industrial processes and overseeing electrical
contractors. Relocation assistance offered. Must be a
licensed PE and experienced in the electrical design of industrial
facilities. |
 |
CH2M HILL
12377 Merit Drive
Dallas, TX 75251
Phone: 269-266-2758
Website
Contact: Derina Adamczak |
|
December 22, 2007
|
|
|
HBE Corporation
is the nation's largest and most experienced designer and
builder of healthcare facilities. Since 1960 nearly 1,000
healthcare providers have relied on our single-source approach to
planning, designing and building hospitals. Our ability to innovate,
integrate and execute complex healthcare building programs has
earned us a national reputation for delivering unmatched standards
of efficiency and value. Today, HBE is the healthcare industry’s #1
design-build firm.
Duties & Responsibilities: Responsible
for the entire project electrically. Must be capable of doing short
circuit analysis, coordination studies, writing specifications,
analyzing problems and writing reports. Must have a basic knowledge
of engineering economics, able to write effectively and communicate
with utility companies. Design experience should be predominant in
the commercial and institution areas.
Education Required: College B.E.E. or
B.S.E.E.
Experience Level: 10-20 Years of electrical designing and
running projects. |
|
|
HBE Corporation
11330 Olive Boulevard
St. Louis, MO 63141
Phone: 314-567-9000
Fax: 314-567-0573
Contact: Melvin Nelson
Website:
www.hbecorp.com |
|
November 21, 2007
|
|
Chemic Engineers is a
30-year old company providing engineering services to the
petrochemical and energy industries in the Houston and Gulf Coast
area. Chemic Engineers provides excellent benefits and a challenging
work environment. Several positions with immediate openings. Send
resumes to jobs@chemic.com
|
 |
Chemic Engineers
4820 FM 2004
Hitchcock, TX 77563
Phone: 409-986-6504
Fax: 409-986-9600
Contact:
Renee Hartenberger
Website:
www.chemic.com |
|
July 27, 2007
|
|
Seeking Electrical Engineering
Manager and others
Dynegy is the fourth largest Independent Power Producer in the
country. We are currently engaged with 2 Power Plant construction
projects in Arkansas and Texas, with others in the development
stage. We are currently looking to fill opportunities for both
Houston based home office positions and Project based positions as
follows; Electrical Engineering Manager, Electrical Engineer, Site
Electrical Engineer, Site I&C Engineer
Please apply if you feel you have the
qualifications required.
|
 |
Dynegy, Inc.
Downtown
Houston, TX
713-767-0157
www.dynegy.com
Contact:
Ron Quimby |
|
July 7, 2007
|
|
Seeking Electrical Engineer
Davidson manufactures a line of rugged and intrinsically-safe fiber
optic systems to measure temperature and pressure in harsh
industrial environments at very high speed, at very long
transmission range, and with very high resolution.
Davidson is seeking a Senior Electrical
Engineer. This position is responsible for the design and
development of electronic circuits and systems and for the support
of electronic systems used in production and quality control
functions.
Please send resume and cover letter to
ebecker@davidson-instruments.com or mail to Davidson
Instruments, 8301 New Trails Dr., The Woodlands, TX 77381 |
 |
Davidson Instruments, Inc.
8301 New Trails Drive
The Woodlands, TX 77381
Phone: 281-362-4900
FAX: 281-362-4933
Email Contact:
Human Resources
Website:
www.davidson-instruments.com |
|
June 10, 2007
|
|
|
Cyberonics is looking for an
Electrical Engineer III or Higher
RESPONSIBILITY AND AUTHORITY
This position is responsible to design, develop, document, and
verify products.
PRIMARY ACTIVITIES
- Apply electrical engineering knowledge to the design and
development of new products as well as product changes and
enhancements.
- Solve electrical engineering problems at the component
through system level.
- Conduct testing utilizing existing test protocols or develop
new ones as needed.
- Generate written protocols and reports.
- Assign work to technicians and temporary workers as needed.
- Complete projects (including product enhancements) in a
manner consistent with corporate objectives.
- Contribute to the intellectual property position of the
company via invention and patent applications.
- Maintain accurate documentation of concepts, designs,
drawings, and processes.
- Maintain current knowledge of competitive technologies in
addition to medical, technical, and biomedical developments
related to company products.
- Provide electrical engineering and technical support of
products introduced into both the domestic and international
markets as well as physician in service programs.
- Oversee outside vendors and consultants as required.
- Maintain GMP systems, including pre-production quality
assurance procedures, pre- clinical testing programs, and post
production GMP compliance in coordination with the Document
Control, Clinical, and Quality Assurance functions.
- Provide electrical engineering support in the resolution of
product complaints and/or safety issues.
- Work with other engineering, manufacturing, clinical
affairs, sales and marketing, and quality assurance staff to
coordinate pilot production of new products.
- Support company goals and objectives, policies and
procedures, Quality System Regulations, and FDA regulations.
Performs other
duties as may be required by supervisor.
TRAVEL REQUIREMENTS
This position may require business
travel.
MINIMUM REQUIREMENTS AND QUALIFICATIONS
BSEE
Exposure to design of low power products for medical
applications • CAD for electronic design •
MS Office Suite
DESIRED SKILLS AND QUALIFICATIONS
Analog Circuit Design
- Discrete circuit design (I/O buffers, switches, filtering) •
DC/DC converters • Receive and transmit circuits for
Magnetically coupled communication systems up to 120KHz • Mixed
signal (Knowledge of ADCs and basic sampling theory) • Schematic
CAD tools (preferably OrCAD) • Spice Based simulation •
Laboratory o Ability to test and troubleshoot designs at various
stages of completion o Experience with O'scopes, signal
generators, multimeters, spectrum analyzers • Signal Processing
(TI based processors a plus) • Layout CAD tools (OrCAD based
tools a plus) • Knowledge of Bluetooth, WLAN, and other Wireless
technologies •
Basic
understanding of Assembly and C language
EDUCATION AND EXPERIENCE
- Electrical Engineer III – BS Electrical Engineering with
minimum 5 years experience or MSME and minimum 3 years
experience, or otherwise proven performance
- Sr. Electrical Engineer – BS Electrical Engineering with
minimum 8 years experience or MS in Engineering and minimum 6
years experience, or otherwise proven performance
- Principle Engineer – BS Electrical Engineering with minimum
15 years experience or MS in Electrical Engineering and minimum
13 years experience, or otherwise proven performance
|
 |
Cyberonics
100 Cyberonics Blvd.
Houston, TX 77058
Phone: 281-228-7396
FAX: 281-853-2635
Website:
www.cyberonics.com
Contact Email Address: Talent
Acquisition |
|
June 4, 2007
|
|
|
Arseal is a full service
engineering firm with the capacity to offer turn-key engineering
solutions. We have designed and built projects for companies like
Kinder Morgan, Georgia Power, Valero LP, Colonial Pipeline Company,
Magellan Midstream Partners. Looking for AutoCAD Designers to
support our electrical engineering group. Must have proven AutoCAD
skills and experience in development of electrical details
preferred. Creation of electrical wiring diagrams, layouts, bills of
material, and schematics. Solid technical aptitude in both
mechanical and electrical systems. Communicate well in English,
cooperative and courteous, able to work in a fast paced engineering
atmosphere.
|
 |
ARSEAL Technologies, LLC
5900 Windward Parkway, Suite 475
Alpharetta, GA 30005
Phone: 678-387-1200
FAX: 678-297-9644
Contact: Katy Bergevin
Website:
www.arseal.com |
|
April 24, 2007
|
|
|
Switchgear
component manufacturer is seeking an
Electronics Design Engineer/Programmer Switchgear component
manufacturer seeking experienced engineer with analog and digital
product design. Must have working knowledge of MPLAD IDE software
and hardware, PICs microcontroller development tools, MATLAB/Simulink
graphics simulator and able to perform control system design using
standard initialization routines and C language. Experience with
successive ports, protocols and connection a plus. Must have good
communication and organization skills. |
 |
Electromagnetic Industries LLP
1507 Beaumont Street
Bayton, TX 77520
Phone 281-422-5225
FAX: 281-422-5225
Contact:
Chris
Lahowetz
Website:
www.electromagnetic.biz |
|
April 24, 2007
|
|
The Okonite Company, a leading
manufacturer of insulated wire and cable, has an opening for an
Applications Engineer. Job responsibilities include product
technical support to Okonite Sales Offices in major U.S. cities
providing assistance to customers' application needs. Job home base
will be Houston, TX.
|
 |
The Okonite Company
15211 Woodham Drive
Houston, TX 77073
Phone: 281-869-5404
FAX: 281-821-7855
Contact: Johnny Wynn
Website: www.okonite.com |
|
March 31, 2007
|
|
GARMIN International is a
world leader in GPS navigation for aviation, marine, automotive,
fitness and recreational markets. We have opportunities for a Senior
Compliance Engineer (10 years experience) and Compliance Engineer (3
years). See the full descriptions and apply at http://www.garmin.com/careers/jobs/
Be responsible for regulatory compliance activities for Garmin
consumer products while ensuring the development teams’ success in
meeting worldwide Safety, EMC, wireless, SRD, Design-for-Environment
and/or hazardous substance regulations. Responsibilities include:
(1) generating regulatory compliance plans to guide EE and ME
design, EMC prescreen and tech pubs functions, (2) the accuracy of
the regulatory strategy, (3) acting as issue leader for assigned
standards and directives in development.
|
 |
GARMIN International, Inc.
1200 E. !51 Street
Olathe, KS 66062
Phone: 913-397-8200
Contact: Deana Diebolt
Website:
www.garmin.com
|
|
March 4, 2007
|
|
Daniel Measurement and Control,
Inc., the world leader in providing measurement solutions to the
oil and gas industry, has an opportunity for a self-starter on our
Gas Chromatograph team.
The company is in need of a Senior Programmer with MFC/GUI Windows
programming experience for a contract position lasting approximately
one year. Applicants must be experienced in writing GUI controls in
C++. Duties involve developing dialog based multithreaded VC++
programs to interface with a state of the art next generation GC.
Technologies involved would be VC++, MFC, TCP/IP, TAPI, Active X and
XML. Bachelor’s degree in Computer Science preferred. A minimum of 5
years Windows programming experience is required.
Daniel Measurement and Control is an equal opportunity employer. We
value and welcome diversity in our employees and do not discriminate
against any applicant or employee on the basis of race, sex,
religion, age, national origin, color, disability or veteran status.
We are committed to providing a workplace free of any discrimination
or harassment. Qualified candidates are invited to submit a resume
via e-mail to Human.Resources@emersonprocess.com, or via mail to
P.O. Box 19097 Houston, Texas 77224
|
|
 |
Emerson Process Management
Gas Chromatograph Division
5650 Brittmoore
Houston, TX 77041
Phone 713-827-4301
FAX: 713-827-4326
www.daniel.com
Contact:
Pete Laurin |
|
February 22, 2007 |
|
PORT TOWNSEND PAPER CORPORATION is
looking for an ELECTRICAL ENGINEER - Involved in the design,
administration, and management of electrical projects. This can
include capital expansion and replacement projects as well as small
electrical project support to maintenance and operations. The
electrical engineer also provides electrical design support to
non-electrical Project Engineers and Project Managers. The
Electrical Engineer will also serve as the interface between the
mill and its electrical power supplier(s), and with vendors relating
to mill electrical system studies/surveys. Monitors mill for
adherence and compliance with electric codes.
B. S. degree in Electrical engineering discipline.
5 years experience as an electrical
project engineer, preferably in a wood products related industry.
Computer literate; able to read prints, plans and specifications;
familiar with AutoCad
|
|
 |
PORT TOWNSEND PAPER
CORPORATION
100 Mill Road
Port Townsend, WA 98368
Phone 360-385-3170
Fax: 360-379-2102
Website: www.ptpc.com
Contact:
Rita Hubbard |
|
February 19, 2007 |
|
|
